Tutorial: Curling Ribbon French Clip

Today I’m going to show you how to make this super fun and ultra easy curling ribbon french clip. I think these would be fun to make for party favors for a group of little girls, don’t you?

Excuse the hair in this picture lol. I chose the wrong day to braid it overnight :)

You will need:

Curling Ribbon (colors of your choice)

a French Barrette

Scissors

Directions:

Start by cutting 24-30 10″ pieces of curling ribbon. I suggest using approximate equal quantities of each color you are using.

Now, take the center bowed bar out of your french clip.

Start tying your pieces of curling ribbon onto your clip. Tie them so that the knotted side is up on the top side of your clip.

Continue tying and alternating colors as you see fit. I did two strands of each color and alternated blue, red, silver.

This is what the underside looks like.

This is what it should look like once you have it all tied.

My pieces were a bit long, so I trimmed them up before the next step.

Now curl each of the ribbons with your scissors by dragging the rougher or less shiny side against the blade on your scissors.

Fluff and pull the ribbons into place however you like them.

Put your center bar back into your french clip.

All done! See how easy that was?

Keep watching for more fun ideas and tutorials!  We have everything you need to make your own hairbows.  We even have tutorials on how to make a hairbow.  If you are looking for hardware or bow making supplies, we have everything in bulk for always cheap, wholesale prices.

Thank you,

http://www.alwaysunderpay.com

Patriotic Sparkler Bow!

Who wants to see how I made this fabulous 4th of July themed boutique bow?  Isn’t this just so festive?  I love patriotic and red/white/blue items, especially on little girls.

Patriotic Hairbow

I actually have some cousins with daughters (lucky ladies!) who are going to be entering a local children’s parade. They are planning on a patriotic theme for their group, so they had asked me if I could teach them how to make some cute patriotic themed bows.

So, this is for them–and of course–for you!

You will Need:

1 Boutique Bow–tutorial at this link

1 Stacker Bow–tutorial at this link

1 8CM Lined French Clip–tutorial at this link

A Few Pieces of Star Wire Garland

A Rhinestone or Center Embellishment (optional)

A Scrap Piece (maybe 6″8″ long) of 3/8″ Grosgrain Ribbon

About 12″ of String

Hot Glue Gun and Glue Stick (not shown)

Directions:

Start by hot gluing your stacker bow to your boutique bow–center to center.

Lay your pieces of wire garland in a straight horizontal line center to your bow. Use the string to tie them to your bow nice and tight.

Now your thinking, “that is not cute” lol. That’s what this next step will take care of.

Pull your wire garland and fan it out on each side of the center string. Trim it up if you’ve made your pieces too long for your liking.

Now hot glue that scrap piece of coordinating 3/8″ grosgrain ribbon to the center of your bow like so. This piece will hide that ugly string you used in the last step.

Now flip your bow over to the backside. Take the center bar out of your lined french clip and hot glue it to the center of the back of your bow.

Wrap your 3/8″ grosgrain ribbon up and hot glue it to the french clip. Then trim the end off and run a lighter over it to heat seal it from unraveling. Do this to both ends of the ribbon.

Put the center bar back into your clip.

This is actually very cute without any center embellishments. So, you could just leave it this way.

4th of July Hairbow

Or, you can be like me, and just have to add a little more bling.

So, I hot glued the rhinestone to the center of my bow.

Voila! Done–isn’t it just adorable?

Red/White/Blue Hairbow

Thanks for stopping by our blog today–leave some love for us if you like it!

And stay tuned for more tutorials and other fun posts!

How to Make a Pony-O

With summer coming, lots of kids, including girls, will be playing a lot of different sports. So, I thought it would be fun to show you how to make these pony-o holders for ponytails since we like to have our hair up during sports, right?  They are also great for cheer and cheer leading.

Plus, this is a really great project for using up a bunch of old scraps. Or, you can make a bunch for your daughter’s whole team if you buy ribbon!

Excuse the messy hair–I only had myself for a model today :)

Cheer Pony-OYou will need:

Cheer Pony-O SuppliesScrap Ribbon pieces

Elastic Pony Holder

Scissors

Needle and Thread

Glue Gun and Stick (not shown)

Directions:

Start by cutting your ribbons all about the same length however long you’d like them to hang. If you want them to vary in length, you can trim them up after you are done.

Now, stack your ribbons however you want them to look. I put my wider black ribbon on the bottom then stacked them up according to width. But you can do it however you like.

Gather your ribbons in about the center–you don’t have to be perfect. Just approximate.

Take your needle and thread and sew a basic basting stitch down the center of your ribbons making sure to catch them all in there at least once. This will just make sure that when your little girl is wearing this, the ribbons won’t slide out or become uneven.

Once you have pulled your thread through, you can take the needle off. Or you can use it to aid in tying. I tend to poke myself, so I take it off :)  Leave some tails on each side of your ribbons with the thread to use for wrapping.

Now fold your ribbons down the center accordion style, like so:

Wrap the thread around the folds until you feel it is fairly secure.Don’t tie off yet though.

Now hot glue your ponytail holder to the backside on the center of your ribbon bunch being careful not to get hot glue on your ribbons like I did :(

Wrap the thread tails around the ponytail holder and ribbons just to help secure it a little bit more. When you’re comfortable that it is good and secure, tie the tails together in a knot or two and snip the leftover ends off.

Take a scrap piece of ribbon (for wrapping around the center of your pony-o, and tie a knot in the center. I tied two because my ribbon was small.

Hot glue the knot to where you want the front top of your pony-o to be. Then trim the ends however short they need to be to wrap around the pony-o and elastic ponytail holder. Hot glue the ends around the center of your pony-o holder.All that’s left to do now is trim up your ends however you want them. You’ll want to heat seal those lightly with a lighter or other heat source to keep them from fraying as well.

Some people add rhinestones or other fun little things by hot-gluing them to your ribbons too. Make it yours!

Tulle Bow

Today I’m going to teach you how to make this fun tulle bow. These are so easy and inexpensive, you could make one to match all of your little girl’s outfits!

Tulle Hairbow

You will Need:

Tulle Bow SuppliesTulle (This comes on our website on 6″X25′ rolls for $2.25 each!)

3/8 Grosgrain Ribbon for center (I probably used less than 2″)

Lined Alligator Clips (these are available on our website in double or single prong in lots of colors)

String

Small cardboard piece (This one is 5.5″ long and about 3.5″ wide–the width doesn’t really matter.)

Scissors

Glue Gun and Glue Stick (not shown)

Directions:

Start by taking your tulle and wrapping it lengthwise around the cardboard. I wrapped mine all the way around 10 times. But I think may be a couple less might have been better :(

When you feel like you have enough tulle on there, cut both ends straight down the width of the tulle giving you a stack of squarish looking tulle pieces.

Now squish your tulle together in the middle and tie it up with string really tight.

Start fluffing out your tulle til you like the way it looks. Trim it up on each side if you have pieces that are sticking out or too long.

Glue your alligator clip to the back of your bow with the hot glue gun.

Now, to finish off this cuteness, glue a small piece of your grosgrain ribbon around the center of your bow to hide the string and just look cute. You can do this before you attach your clip or after. I find that if you do it after, it helps the clip stay in fine hair a little bit better.

Finished Tulle BowVoila–you have a fun and easy cute hair bow!  You can attach it to a baby headband, crochet headband, or just straight into the hair!  You could even attach glue it straight onto a tutu to add some more colors to the tutu.