How to Make a Stacked Bow

This tutorial is going to make use of all those other bow tutorials I’ve been teaching you with the last couple of weeks! We’re going to put all of those pieces together to make this nice big stacked bow!

Of course, if you don’t like it this big, you can leave any part of it out that you like. I just like a nice big bow.

And, if you leave a comment, you’ll have a chance to win this beauty! So get those comments in people!

One comment per person please. Winner will be selected May 21st at noon (MST) via random.org.

**EDIT** We have a winner!! Random.org chose comment #24–Theresa Crabb claim your prize!

Theresa–please email our customer service department at customerservice@alwaysunderpay.com with your address info so we may send out your super sweet and free stacked bow!

You will need:

**Note** For a complete list of items needed to make the pieces of this stacked bow, click on the highlighted links on the piece name. That will take you to an older post of how to make the piece you are clicking on.

1 Boutique Bow (minus the finishing ribbon and clip)

1 Loopy Surrounder Bow

1 Layered Spike Bow (minus the finishing ribbon and clip)

1 Topper Bow (minus the finishing ribbon)

Lined French Clip (or you can leave it unlined, whatever you prefer)

1 Scrap Piece of Coordinating Ribbon

Scissors

Lighter (not shown)

Glue Gun and Sticks (not shown)

Directions:

Start by putting a good dab of hot glue on the back of your loopy surrounder bow.

Now glue it to your boutique bow as shown below. Or sideways if you like. It’s totally up to you. Careful not to burn yourself!

Make sure you put some pressure on the spot with the glue and give it a minute or so to dry before moving onto the next step. We need this thing to be sturdy!

Next, using a good fair amount of glue in the center (because this piece is pretty bulky), hot glue your layered spikey bow on top of the loopy surrounder bow.

Again, put some pressure on it with your fingers and hold for a minute or so.

You could stop here and finish off. But, since this is a stacked bow, and I need to use those pieces you’ve learned to make, let’s hot glue that topper bow in the center of your layered spike bow.

Looking cute! Now for finishing up!

Take your scrap ribbon piece and tie a knot in the center. Or you can just leave it straight if you like. Glue the lengthwise center of that piece to the vertical center of your bow.

Now take the bar out of the center of your french clip and hot glue it to the back of your bow.

Take the tails on that scrap piece of ribbon and wrap them around the back of your bow.

Hot glue the ends to the underside of your french clip. Trim the ends off and heat seal with your lighter.

*TIP* Use your lighter to burn off any flyaway glue pieces. Just run it lightly and quickly  over them–don’t linger or you’ll burn the ribbon or your hand!

Now you can put the bar back into your french clip and we’re done!

Don’t you just love it? Your turn! Give it a go. It isn’t as hard as it looks.  Don’t forget, this would look absolutely darling slipped through a crochet headbandBaby headbands are just getting so fun, aren’t they?

Tutorial: How to Make a Boutique Bow

Today’s tutorial is on how to make a boutique bow. I used to be pretty intimidated by these bows. I thought they looked hard, but they are actually pretty darn easy, so I’m excited to share that with you today!

Boutique Bow

You will need:

Boutique Bow SuppliesAbout a 30″ Length of 1.5″ Grosgrain Ribbon

A Small Scrap of 3/8″ Grosgrain Ribbon

 Lined Alligator Clips

Some String

Scissors

A Lighter

Glue Gun and Glue Stick (not pictured)

Directions:

Start by laying your ribbon out horizontally flat in front of you. Then take one end of the ribbon and make a loop by pulling the end up and around the flat ribbon.

Now take the other end of ribbon and make a second loop on the other side like this:

Next, bring up that longer piece on the right in the above picture and make another loop that curls under. This part is a bit tricky–you need to tuck the tail of this loop under the tail on the first loop. I hope that makes sense because I couldn’t really get a good photo to illustrate. I did try though.

Below is a picture of the backside of the bow at this point.

Now bring the tail back up and make your last loop curving the tail up through the center of the bow.

Next smoosh the center of your bow together sort of like an accordian.

Wrap the string tightly around the center to keep your bow from unraveling. Once you are comfortable that the bow is secure, tie a knot in the string and trim any loose ends off.

Trim up the tails on your bow. I like to cut mine into V shapes.

At this point you should heat seal the ends of the tails on your bow. Just run a lighter lightly over the V shape cuts you made to prevent the ribbon from unraveling. It doesn’t take much heat–you will see it happen. Be careful not to burn yourself!

Now glue your lined clip to the back of your bow.

Almost done. Next, glue your scrap piece of 3/8″ ribbon around the front of your bow and over the back side of your alligator clip. Trim up the ends and heat seal the 3/8″ ribbon end. Done! Super cute and easy to make bow!

Boutique Bow Tutorial

**Note**This bow is the 2nd piece in a 6 part series that ends in a stacked bow tutorial. The other pieces in the series are:

Step 1: Lined French Clip

Step 2: Boutique Bow

Step 3: Loopy Surrounder Bow,

Step 4: Layered Spikey Bow

Step 5: Topper Bow

Step 6: Putting it all together Stacked Bow

Thank you for taking a look at our hairbow tutorial, directions and patterns.  They are free for you to use.  Our online tutorials are to help you make cheer bows for cheerleaders and cheerleading.  They are also great for little girls.  Making bows is fun and the possibilities are endless.  Come look at our shop to purchase grosgrain ribbon for your hairbows, or to look at our hair bows that are for sale.

Tutorial: Layered Spike Bow

I have to say, this is my favorite bow tutorial so far. I hadn’t really expected it to turn out so well, but I just love it. And now I get to teach all of you how to do it!

Layered Spike Bow

You will need:

Layered Spike Bow SuppliesRibbon pieces–measurement and qty purely depend on how big you want your bow and how many layers you’d like. I ended up with 4 layers. I didn’t use the lime green 5/8″ ribbon pictured.

Scissors

String

A Lighter

Directions:

Start by cutting your ribbon pieces down to the length that you want them. As I said above, the length you need depends totally on how you want your bow to look. My bow ended up at about 4.5″ wide. The Pink layer on bottom was cut at 5″ before trimming and sealing. Then I cut each layer a little bit smaller than the one under it. I didn’t use the lime green ribbon 5/8″ ribbon because I just thought there were enough layers without it.

Then, cut the ends how you like them to look. I like mine in V cuts. So that’s how I cut them except the 3/8″ swiss dot ribbon. I just angle cut that because it was too small.

This is how I V cut. Fold your ribbon in half, then cut from the fold down toward the corners on the end. Perfect V every time.

Now heat seal all of your ends. This takes some time, but don’t skip it unless you want your ribbon to fray. Just run a lighter really quickly over all of the V-cut ends. Don’t linger–you will start to burn the ribbon (speaking from experience :)).

Take the ribbons that will go on bottom and crease fold them in the center like this:

Still holding your first creased ribbon, do the second and third ones the same way–holding all of them tight.

Now, hold them together and wrap the string tightly around the center. Tie a knot in the string and trim loose ends. That’s your first layer!

Do this to all of your other ribbons putting them together as you see fit–no rules here.

Next, take your glue gun and glue the layers together in the center where the string is tied one by one, stacking them on top of one another.

Tie more string around the entire stack to help keep it from falling apart in some poor little girl’s hair.

Now just hot glue a small piece of coordinating 3/8″ ribbon around the center and heat seal the ends. Voila–super sweet layered spikey bow!

Layered Spike Bow**Note**This bow is the 4th piece in a 6 part series that ends in a stacked bow tutorial. The other pieces in the series are:

Step 1: Lined French Clip

Step 2: Boutique Bow

Step 3: Loopy Surrounder Bow,

Step 4: Layered Spikey Bow

Step 5: Topper Bow

Step 6: Putting it all together Stacked Bow.  If you don’t have time, or want to purchase all of the supplies, we do have a lot of hair bows for sale.  We have a huge selection of wholesale, cheap hairbows that you can purchase.